Type of washers used in pumbing system

Type of washers used in pumbing system

• Belleville conical washers: Belleville conical washer is a type of washer that adds some extra pressure on the fastener assembly. These washers are often used in the stacks to increasse the deflection, load, or both of them to an assembly depending upon the stack. These washers also work as lock washers by adding some extra pressure and absorbing vibration o an assembly.
• Fender washers: Fender washers are simple round circular washers having a small hole in center of them. Fender washers prevent the pull-through. The fender washers also provide a greater bearing surface under the fastener.
• Fender washers- extra-thick – These washers are extra thick than the normal standard fender washers. Like standard frender washers, these washers provide a greater bearing surface under the fastener.
• Finishing Cup washers - Finishing Cup washers works as a cup for the screw head or fastener to fit in, which creates a finish flush with the top of the head. Cup washers are shaped like a cup so that they can be used for finishing.
• Flat washers: Flat washers are simply thin small plates of round diameter having a hole punched at the center of it whose diameter is equal to the size of a screw or bolt. Flat washers are used in distributing the pressure of threaded screws, bolts, and nuts evenly as the fastener is tightened.
• Falt washers – Miltary standard - Military standard (MS) flat washers go through an extreme level for inspection check for physical, chemical, and dimensional qualities. These washers must have the specific outer and inner diameter specifications. Thse washers are used in denver pipe repair and denver bursting by the denver drain cleaning companies.
• Flat washers – extra-thick - Extra-thick flat washers are thicker than the standard flat washers. These washers are simply thin small plates of round diameter having a hole punched at the center of it whose diameter is equal to the size of screw or bolt. Flat washers are used in distributing the pressure of threaded screws, bolts, and nuts evenly as the fastener is tightened.
• Flat washers – 900 series – The 900 Flat washer series are usually thinner than a standard flat washer whose outer and inner diameter is smaller.
• Lock washers – split ring – Split ring washers are used to prevent the bolts, nuts, and screws from getting loosen from the vibration. As the name sugggests, these washers have a split at one point and they are bent into a helical shape.